Nussbaum WA 780 Manuel D'instructions page 107

3. Press "Enter" ↵ to confirm.
4. Wait until the aligner general set-up screen is displayed.
5. Open the drop-down menu, pressing "F11".
6. Select "Salvataggio Dati" ("Store Data") with the ↑ or ↓ arrows.
7. Press "Enter" ↵ to confirm.
The screen on figure 36 will be displayed.
A B C
D
F
G
N.B.: To move through the different objects (boxes) present on the screen, use the tab key.
8. Use the ↑ or ↓ arrows to select the disc where you wish to "Store the data" in field "B".
9. Use the ↑ or ↓ arrows to select the folder where you wish to "Store the data" in field "C".
10. Press "Enter" ↵ to confirm.
The data filing path is displayed in full in the field "A".
11. In the field "D", it is possible to select automatic filing (Data Saving) using the space
bar.
12. In the field "E", indicate how often you wish to perform "Data Saving" using the numeric
keypad.
13. In the field "F", it is possible to select whether or not to ask if you wish to perform
automatic filing (Data Saving) pressing the space bar.
14. In the field "G", it is possible to select whether the information (Data Saving) is filed
in compressed format (zip) or as a simple copy of the files, pressing the space bar.
15. After setting your own choices, press "F11".
16. Select "Salva impostazioni d'archiviazione" ("Save filing settings") with the ↑ or ↓ ar-
rows.
17. Press "Enter" ↵ to confirm.
18. Press "F3" to confirm.
19. Press "F2", to exit the "Save Data" settings screen and go back to the aligner general
set-up screen.
20. Press "F2" to go back to the starting screen (logo screen).
Note: in this stage, it is also possible to perform "Data Saving" manually, carrying out before
step 19, the following operations:
a) Open the drop-down menu pressing "F11".
b) Select "Esegui archiviazione dati" ("Archive data") with the ↑ or ↓ arrows.
c) Press "Enter" ↵ to confirm.
User Manual WA 780 - Cura S 780
E
36
GB
107