Introduction - Mettler Toledo InFlow 76X Instructions D'utilisation

8

1 Introduction

© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
– The flow-through housings InFlow 76X are safe to operate and has been tested by METTLER
TOLEDO and dispatched ready for installation.
– Before starting to use the flow-through housing, carefully read this instruction manual: the
safety precautions and warnings contained in it must be observed.
In addition to this instruction manual please also note the following:
– all local safety regulations
– all instructions and warning remarks in the publications of the products that are used in
conjunction with the flow-through housing (electrodes, sensors, etc.)
– all safety precautions for the plant into which the flow-through housing InFlow 76X will be
installed
– all instructions and warnings labeled on the flow-through housing InFlow 76X.
InFlow 76X
InFlow 76X
52 403 711