Adaption Of A Intrac Or Infit Housing To The Inflow 76X - Mettler Toledo InFlow 76X Instructions D'utilisation

InFlow 76X
InFlow 76X
52 403 711
4.2

Adaption of a InTrac or InFit housing to the InFlow 76X

Flange version
Place the InTrac- or InFit housing onto the InFlow 76X. A medium proof flat gasket has to
be inserted between housing and mounting flange (see drawing 2). The fixing screws have
to be tightened uniformly and crosswise. The maximum torque is 60 Nm.
InTrac 7XX
Gasket (not included)
InFlow 76X
Drawing 2
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
21
Printed in Switzerland