Product And Material Description; Scope Of Delivery; Packing; Checking The Shipment - Mettler Toledo InFlow 76X Instructions D'utilisation

18

3 Product and material description

© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
3.1

Scope of delivery

Standard supply of the flow-through housing is made up of the following:
– flow-through housing InFlow 76X
– an instruction manual and a quick set-up guide
Additional with flange version:
– fixing screws
– washers
– nuts.
3.2

Packing

The packing consists of cardboard with protective paddings.
Keep the packing for possible later use, such as for storage or transport of the housing. However,
if you wish to dispose of the packing, please observe your local regulations on waste disposal.
3.3

Checking the shipment

When unpacking the shipment, carefully examine for signs of damage. Any damage must
be reported to the carrier and your supplier without delay. Check that the shipment meets the
delivery papers and your order.
NOTICE
Damaged flow-through housings must not be installed or put into operation (see Chapter 2
"Safety").
InFlow 76X
InFlow 76X
52 403 711