Basic Principles; Warning Notices And Symbols - Mettler Toledo InFlow 76X Instructions D'utilisation

InFlow 76X
InFlow 76X
52 403 711
2.6

Basic principles

The flow-through housing InFlow 76X is built in accordance with state-of-the-art technology and
recognized technical safety regulations. However, the flow-through housing can be a source of
risk and danger:
– if the flow-through housing is operated by insufficiently trained persons
– if the flow-through housing is not used in compliance with regulations and/or stipulations for
appropriate use.
The flow-through housings InFlow 76X must be used only in perfect technical condition and for
the purpose intended by the manufacturer. It is assumed that the user is fully aware of safety/danger
issues and respects the instruction manual and all local safety regulations. Malfunction and
damage that can affect safety and function of the flow-through housing must immediately be
remedied by the operator or an expert, and notified to the manufacturer in writing.
2.7

Warning notices and symbols

This instruction manual identifies safety instructions by means of the following symbols:
DANGER
Warns of a hazard that could lead to extensive material damage, death or grievous bodily
injuries.
CAUTION
Warns of a potentially hazardous situation that could lead to minor bodily injury and/or
material damage.
NOTICE
Information relating to technical requirements. Non-observance could lead to defects,
inefficient operation and possible loss of production.
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
11
Printed in Switzerland