Medium Residues; Heat Protection; External Impacts; Emergency Measures - Mettler Toledo InFlow 76X Instructions D'utilisation

16
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland

2.10.2 Medium residues

DANGER
When retracting/replacing an electrode/sensor, small quantities of process medium will
remain at the electrode/sensor. If the medium is a toxic or environmentally harmful substance,
or contains pathogenic germs, then such contamination must be removed and disposed of in
accordance with the applicable regulations!

2.10.3 Heat protection

DANGER
The flow-through is not equipped with heat protection. During steam-sterilization procedure,
the surface of the flow-through housing can reach high temperatures and cause burns.

2.10.4 External impacts

NOTICE
Objects falling on the flow-through housing can damage or destroy the unit, or cause leaks etc.

2.11 Emergency measures

NOTICE
Always observe and comply with local regulations!

2.12 Safety measures

NOTICE
Always observe and comply with local laws and regulations! These are not an integral part of
this instruction manual.
DANGER
It is mandatory to wear protective equipment such as protective goggles and protective
clothing. Aggressive process medium escaping from the system may be hazardous to persons
or the environment.
InFlow 76X
InFlow 76X
52 403 711