Mettler Toledo InFlow 76X Instructions D'utilisation page 22

22
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
INGOLD DN25 socket version
Place the housing in the INGOLD socket (see drawing 3) and tighten the union nut by hand.
The torque of the union nut has no influence to the imperviousness of the connection!
InFit 76X (InTrac 7XX)
O-ring gasket
Examples for installation:
InFlow 76X
Drawing 3
InFlow 76X
180° version
InFlow 76X
52 403 711