Product Overview; Recommended Combination Inflow 76X And Intrac/Infit - Mettler Toledo InFlow 76X Instructions D'utilisation

InFlow 76X
InFlow 76X
52 403 711
3.4

Product overview

The InFlow 76X Series serves as a flow-through housing for METTLER-TOLEDO InTrac and
InFit housings for the measurement of pH, ORP, dissolved oxygen, conductivity and turbidity,
particularly in the field of industrial processes.
The flow-through housings type InFlow 76X are designed for the optimal fitting of the InTrac and
InFit housings in a process or bypass pipe.
The attuned design allows for an optimal inflow of the sensor at maximum safety. All parts of the
flow-through housing being in contact with the process medium are made of stainless steel
1.4404 (316L) or PVDF. The O-rings which come into contact with the process medium are
made of Viton ® (only InFlow 762 with Ingold DN25).
The flow-through housings are available in different versions, based on the product key (see
Section 10.4 "Product key InFlow 76X").
3.5

Recommended combination InFlow 76X and InTrac/InFit

InFlow
InFlow 761, 1.4404 /316L
InFlow 761 INGOLD DN25
InFlow 761 flange DN50
InFlow 762, PVDF
InFlow 762 INGOLD DN25
InFlow 762 flange DN50
Please contact your local METTLER TOLEDO representative for more options.
InTrac
InTrac series housing with recommended
insertion length 70 –100 mm; stainless
steel, and DN25 Ingold housing adaptation. InFit 76X / xS / 70 / 4435 / D10 / xxxx
InTrac series housing with recommended
insertion length 70 –100mm; stainless
steel, and DN50 flange housing adaptation.
InTrac series housing with recommended
insertion length 70 –100mm; PVDF,
and DN25 Ingold housing adaptation.
InTrac series housing with recommended
insertion length 70 –100mm; PVDF,
and DN50 flange housing adaptation.
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
InFit
InFit 76X / xS / 70 / 4435 / D00 / xxxx
InFit 76X / xS / 70 / 4435 / D11/ xxxx
on request
InFit 76X / xS / 70 / PVDF / D00 / xxxx
InFit 76X / xS / 70 / PVDF / D04 / xxxx
Printed in Switzerland
19