Mettler Toledo InFlow 76X Instructions D'utilisation page 5

InFlow 76X
How to use this instruction manual
InFlow 76X
52 403 711
This instruction manual is an integral part of the METTLER TOLEDO flow-through housing
®
InFlow 76X and contains notes and instructions that are important for safety and operation.
All persons working on or with the flow-through housings InFlow 76X must have first read
and understood the chapters appropriate to the work in hand.
Please read this instruction manual carefully before using the flow-through housing InFlow 76X.
Keep this document close to the unit, so that operating personnel may easily be able to refer
to it at any time.
Please first read Chapter 1 "Introduction" and Chapter 2 "Safety instructions"!
Proprietary designations
InFlow, InTrac and InFit are registered trademarks of the METTLER TOLEDO Group.
Viton and Kalrez are registered trademarks of DuPont Performance Elastomers LLC.
All other trademarks are the property of their respective holders.
Term explanation
The generic term InFlow 76X Series used in this instruction manual refers to flow-through
housings of the following types:
– InFlow 761: 1.4404 / 316L version
– InFlow 762: PVDF version
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
5
Printed in Switzerland