Verification Of The Correct Installation - Mettler Toledo InFlow 76X Instructions D'utilisation

InFlow 76X
InFlow 76X
52 403 711
Examples of possible assembly of an InFlow flow-through housing on a pipe, either as a 180° or
90° version. There is the choice of combination with either an InTrac or an InFit housing.
NOTICE
Avoid any installation positions that can create the risk of formation of airlocks,
or contamination through deposits of solid matter to a sensor.
4.3

Verification of the correct installation

NOTICE
The measuring system has to be verified each time before startup. This includes
inspection of the electrode/sensor assembly as well as examination of housing and
system for leaks.
Do not commence operation until the measuring system has been checked and any necessary
corrective action has been taken.
90° version
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
23
Printed in Switzerland