Product Specifications; Technical Specifications - Mettler Toledo InFlow 76X Instructions D'utilisation

InFlow 76X

6 Product specifications

InFlow 76X
52 403 711
6.1

Technical specifications

Ambient conditions
Temperature
Max. admissible pressure [PS]/[TS]
(linear relation)
Medium-wetted materials
Weight
Pressure domain
Explosion protection
Certificates/approvals
For more detailed information regarding electrodes and sensors please refer to the corresponding
data sheets or contact your housing supplier.
–40 ... +100 °C (–40 ... +212 °F)
PVDF: 6 bar / 80 °C (87 psig / 176 °F)
1 bar / 140 °C (14.5 psig / 284 °F)
1.4404/316L: 16 bar / 140 °C (232 psig / 284 °F)
Please refer to the pressure/temperature diagram on
the following page!
InFlow 761: 1.4404/316L
InFlow 762: PVDF (version INGOLD DN25
with Viton O-ring)
InFlow 761: approx. 10 kg (22 lbs)
InFlow 762: approx. 6 kg (13 lbs)
According to PED 97/23/EC, Article 1, Section 2.2:
"Pressure" means presure relative to atmospheric
pressure, i.e. gauge pressure. As a consequence,
vacuum is designated by a negative value.
The body of a flow-through housing type InFlow 76X
must be electroconductively connected to the plant
potential equalization system (functional ground).
Depending on housing model,
following certificates/approvals are included:
– CE Declaration of Conformity
– Pressure Equipment directive,
– Certificate of Conformity according to
EN10204 2.1,
material certificate according to 3.1B
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
25
Printed in Switzerland