Eu Declaration Of Conformity - AHT CB 196 Manuel D'utilisation

AHT Cooling Systems GmbH AHT Cooling Systems GmbH

EU DECLARATION OF CONFORMITY

Manufacturer:
Authorised representative for the
technical documents:
Product name:
Model name:
The serial numbers, important technical data and marks of conformity are given on the rating plate of each individual unit.
The manufacturer bears sole responsibility for issuing this declaration of conformity.
The product described above complies with the provisions of the guidelines:
Compliance of the product described above with the basic requirements of the guideline is substantiated by the technical
documentation as well as complete compliance with the following standards:
Applied harmonised standards for 2006/42/EC Machinery Directive:
DIN EN 60335-1 (VDE 0700-1):2012-10; EN 60335-1:2012
DIN EN 60335-1 Ber.1 (VDE 0700-1 Ber.1):2014-04; EN 60335-1:2012/AC:2014
EN 60335-1:2012/A11:2014
DIN EN 60335-2-89 (VDE 0700-89):2010-12; EN 60335-2-89:2010
DIN EN 62233 (VDE 0700-366):2008-11; EN 62233:2008
DIN EN 62233 Ber.1 (VDE 0700-366 Ber.1):2009-04; EN 62233 Ber.1:2008
DIN EN ISO 12100:2011-03; EN ISO 12100:2010
Applied harmonised standards for 2014/30/EC EMC Directive:
DIN EN 61000-3-2 (VDE 0838-2):2015-03; EN 61000-3-2:2014
DIN EN 61000-3-3 (VDE 0838-3):2014-03; EN 61000-3-3:2013
DIN EN 55014-1 (VDE 0875-14-1):2012-05; EN 55014-1:2006 + A1:2009 + A2:2011
DIN EN 55014-2 (VDE 0875-14-2):2016-01; EN 55014-2:2015
Other standards applied for the design and construction of the products:
EN 378-1:2008+A2:2012
EN 378-2:2008+A2:2012
EN ISO 23953-1:2015
EN ISO 23953-2:2015
EN 60079-15:2010 for: R290 units, R600a units
If any technical changes are made to the product described above without consulting us, this declaration loses its validity.
Signed for the manufacturer and on behalf of the manufacturer by:
Rottenmann, 17.03.2016
E_379425_1016
AHT Cooling Systems GmbH
Werksgasse 57
A-8786 Rottenmann, Austria
Reinhold Resch
Werksgasse 57
A-8786 Rottenmann, Austria
Commercial refrigerating appliance
According to the unit model overview at the beginning of this operating
manual (Part no. 379425).
Machinery directive 2006/42/EC of 17 May 2006
EMC directive 2014/30/EC of 26 February 2014
Reinhold Resch
Development Unit Manager
Authorised representative for technical documents
39