Energy Saving - Victoria Arduino VA358 White Eagle Manuel D'instructions

5.2.5

Energy saving

With the ▲ ▼ buttons to select "ENERGY
SAVING" and press ENTER to access:
Fri/09/09 14:45
LANGUAGE
PROGRAM DOSES
SETPOINT
DISPLAY SETTINGS
► ENERGY SAVING
COUNTERS
1.21 bar
4 options will be displayed:
Fri/09/09 14:45
►
ON-OFF PROGRAM
ACTIVE GROUPS
ENERGY SAVING
POWER MANAGEMENT
1.21 bar
ON-OFF PROGRAM:
The display will read:
Fri/09/09 14:45
MONDAY
ON 07:30 OFF 23.30
1.21 bar
Where the ON and OFF values indicate when
the machine will turn on and off.
• Press ▲ ▼ to change the day forward and
backward.
• Press ENTER to vary the programmed start-
ing up time (the message ON 07:30 will start
to flash on and off).
• Use the ▲ ▼ keys to vary the starting up
time.
• Press ENTER to confirm and to go on to the
programmed switching off time (the mes-
sage OFF 23.30 will start to flash on and off).
• Use the ▲ ▼ keys to vary the switching off
time.
• Confirm by pressing ENTER.
• To de-activate the on/off function on weekly
day-off, press RESET.
The display will read:
Fri/09/09 14:45
DAY OFF
1.21 bar
(to reinstate, press RESET)
After Sunday, still pressing ▼ you move to
the next page.
ACTIVE GROUPS:
This function serves to set the groups that are
actually active when the machine is switched
on:
Fri/09/09 14:45
GROUP 1
GROUP 2
1.21 bar
To set the active groups when the machine is
switched on, proceed as follows:
• Open the settings by pressing ENTER.
• You can turn on / off the groups using the
▲ ▼ keys. Press ENTER to confirm and
go to the next group. Confirming the last
group to return to the menu.
NOTE: To make the change effective, it is nec-
essary to quit the programming mode,
switch the machine on and off from the
main switch, which us located In the
bottom right.
ENERGY SAVING:
This function allows the machine to enter stand-
by mode or not, which makes it possible to
choose whether or not to switch off the machine
completely or to keep it at a set pressure (less
than working levels).
ENERGY SAVING
STANDBY
1.21 bar
Use the ▲ ▼ keys to select the following options:
• 0.10 bar: during the OFF state, the machine
maintains a pressure of 0.10 bar.
• 0.50 bar: during the OFF state, the machine
maintains a pressure of 0.50 bar.
ON
• 0.80 bar: during the OFF state, the machine
maintains a pressure of 0.80 bar.
ON
Press ENTER to confirm the required option.
This operation is used with both manual switch-
ing on/off using the button ON /OFF, and auto-
matic switching on/off by programming the
machine.
Fri/09/09 14:45
0.80 bar
55