Programming; Key; Visualization; Language - Victoria Arduino VA358 White Eagle Manuel D'instructions

5.

PROGRAMMING

5.1

KEY

3
2
1
5
4
LCD Display.
①
RESET key:
to confirm and return
②
to the previous step.
CURSORS key: to scroll the menu and
③
to increase and
④
decrease values.
ENTER key:
to access the menu.
⑤
ACCESS TO MENU:
To enter the machine menu, select with the ▲
▼ keys the button and confirm with the
Menu
ENTER key.
The display of the menu can be set to two
modes:
• USER (password enabled);
• TECHNICIAN (password disabled).
The machine has the password off by default,
with the ability to access the full menu.
If a password was set, accessing the menu you
will be asked to enter a password:
INSERT PASSWORD
- -
1.21 bar
To enter USER mode, press ENTER without
changing any value.
Fig. 20
To enter TECHNICIAN Mode, enter the pass-
word acting with the ▲ ▼ keys and press
ENTER.
5.2

VISUALIZATION

LIST OF DISPLAY FUNCTIONS

LANGUAGE

PROGRAM DOSES
SETPOINT
DISPLAY SETTINGS
ENERGY SAVING
COUNTERS
FAULTS HISTORY
TECHNICAL SETTINGS
The machine will read:
►
LANGUAGE
PROGRAM DOSES
SETPOINT
DISPLAY SETTINGS
ENERGY SAVING
COUNTERS
1.21 bar
Fri/09/09 14:45
►
FAULTS HISTORY
TECHNICAL SETTINGS
- -
1.21 bar
5.2.1
Select with ▲ ▼ "LANGUAGE" keys to access:
►
LANGUAGE
PROGRAM DOSES
SETPOINT
DISPLAY SETTINGS
ENERGY SAVING
COUNTERS
1.21 bar
This shows the page for selecting the language
for the whole interface.
►
ITALIAN
ENGLISH
FRENCH
GERMAN
Fri/09/09 14:45
SPANISH
1.21 bar
Select with the ▲ ▼ keys language and con-
firm by pressing ENTER.
Fri/09/09 14:45
Language
Fri/09/09 14:45
Fri/09/09 14:45
51