Starting The Set-Up Wizard; Viewing Software Information; Data Protection; Configuring The Display Lighting - Medion Life P85003 Notice D'utilisation

15.6.2. Searching for software updates
Select CHECK NOW to start searching for software updates.

15.7. Starting the set-up wizard

Select SETUP WIZARD to start the set-up wizard as described in the section on
using the device for the first time.

15.8. Viewing software information

The software version and radio identification number of the device are shown un-
der INFO.

15.9. Data protection

Select PRIVACY POLICY to view the data protection information as shown in the
section on setting up the device for the first time.
15.10. Confi guring the display lighting
You can configure the display lighting under BACKLIGHT:
– Dim the display in standby mode after a pre-determined time
– Display brightness
Setting the dim time in standby mode
 Select SWITCH-OFF and press OK to confirm. Select ON, 10, 20, 30, 45,
60, 90, 120 or 180 seconds and press OK to confirm.
Display brightness during operation
 Select OPERATION and press OK to confirm. Set your preferred brightness
HIGH, MEDIUM, LOW and press OK to confirm.
Display brightness in standby mode
 Select STANDBY and press OK to confirm. Set your preferred brightness
HIGH, MEDIUM, LOW or OFF and press OK to confirm.
278