Create Studio Combi Pro 402 Manuel D'utilisation page 20

Install the lower hinge assembly and adjustable feet.
1. Install the bottom hinge assembly mounted on the left side
of the bottom of the cabinet.
2. Install the adjustable foot on the right side of the bottom
of the cabinet.
Install the doors.
1. Remove the left-hand (plastic) stop from the accessory
bag, install it on the other side of the door together with
the metal stop removed from the right-hand side and secu-
re them with two screws.
2. Remove the trim cover from the accessory bag, install it on
the right side of the door (place the door communication
line inside the trim cover) and secure it with screws.
3. Remove the hole cover and shaft sleeve from the freezer
door, change their position to the other side, and then se-
cure them firmly.
4. Install the freezer door on the refrigerator, remove the left
centre hinge from the accessory bag and fix it to the refri-
gerator with two bolts and a screw.
5. Install the refrigerator door on the refrigerator.
6. Remove the upper left hinge from the accessory bag, at-
tach it to the refrigerator with screws and connect the wi-
ring harness.
7. Remove the upper left hinge cover from the accessory bag
and install it on the refrigerator.
8. Install the hole cover on the top right side of the refrigera-
tor and secure it with a bolt.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substanc-
es in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin
shown on the package indicates that the product at the end of its service life shall be collected as separate
waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal
centres specialising in separate collection of waste electrical and electronic equipment, or given back to the re-
tailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection
for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally
compatible way contributes to preventing possible negative effects on the environment and health and optimis-
es the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user
involves application of the administrative sanctions according to the laws.
20 E N G LI SH