Create Studio Combi Pro 402 Manuel D'utilisation page 10

• The position you choose for installing the refrigerator should be well ventilated and have less
hot air.
• Do not place the refrigerator near a heat source, such as a stove or boiler, and avoid direct sun-
light to ensure the cooling effect and save energy.
• Do not place the refrigerator in a humid place to prevent rust and loss of electricity.
• The result of the amount of refrigerant charge in the refrigerator divided by the total space of the
room in which the refrigerator is installed must be less than 8g/m³. The quantity of refrigerant
charged for the refrigerator is shown on the data plate.
• During operation, the refrigerator releases heat into the surroundings. Therefore, at least 30 mm
of free space should be left at the top, more than 100 mm on both sides and more than 50 mm at
the back of the refrigerator.
Side view
• Place the refrigerator on a solid, flat surface to keep it stable, otherwise the refrigerator will pro-
duce vibrations and noise. Ensure unobstructed ventilation around the refrigerator.
• When the refrigerator is placed on flooring materials such as carpet, straw mats, or polyvinyl
chloride, solid support plates must be placed under the refrigerator to prevent it from changing
color due to heat dissipation.
• Do not cover or block the vents or doors of your appliance.
• Keep the appliance clean and in a dry, well-ventilated place away from heat sources. Place the
appliance evenly and do not place heavy objects on it.
• The unit must not be accessible to prevent children from playing with it.
10 E N G LI SH
FACILITY
Front view Top view