Operation; Setting The Operating Mode - Renkforce DL-LED107S Mode D'emploi

9. Operation

a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additi-
onally, it can be used as a master device with integrated controller to control other connected effect lights
synchronously in master-slave operation, or as slave device via the controller of another effect light.
Use the LED display and function buttons FUNC, UP, DOWN and ENTER to set the operating modes.
• Press FUNC repeatedly to select the desired function.
• Press the ENTER button to confirm your selection.
• Select the desired operating mode with the UP and DOWN buttons.
• Press the ENTER button to confirm your selection.
• Select the desired option with the UP and DOWN buttons.
• Confirm your selection again with ENTER.
The installed controller needs approx. 15 seconds to accept and implement the settings. The
effect light is off during this time.
Overview:
24