Warming Function; Memory Function - Domo B3971 Mode D'emploi

WARMING FUNCTION

In case you should not make it home in time, the bread maker will continue
to heat the bread for another 60 minutes. This additional time is not included in the
program time. Press the 'start-pauze/stop' button for a few seconds, if you want to interrupt this part of
the process. If you leave the bread in the bread maker for more than an hour, it will become moist.
Rinse the bread pan immediately with warm water, after you've taken out the bread, to make sure the
kneading paddles don't keep stuck to the axle.
Do not activate the bread maker, if the appliance hasn't cooled down or warmed up yet.
ADDING ADDITIONAL INGREDIENTS
During the kneading process of the following programs, there will be a beep after kneading: Normal,
French, Whole Wheat, Sweet, Rice, Gluten free, Fast, Fruit, Cake, Raisins/Nuts, Rye, Brioche, Italian. This
beep indicates that you can add additional ingredients such as raisins, nuts, seeds, etc. You can add the
ingredients through the dispenser or manually.
Dispenser
Open the dispenser by sliding the lid to the left. Add the ingredients. Close the lid.
The ingredients in the dispenser will automatically be added to the bread after kneading and rising.
Caution:
· Do not add moist, liquid, or powdered ingredients through the dispenser.
· Never overfill the dispenser.
· It is best to chop large nuts into finer pieces before adding them to the dispenser.
· Before adding ingredients to the dispenser, make sure that the valve on the inside of the appliance is
closed.
Manual
You can also add ingredients manually. When you hear the beep, pause the program, open the lid, add
the additional ingredients, then close the lid and press the start button again. This manual method is best
used for moist, runny, or powdered ingredients or larger quantities.

MEMORY FUNCTION

If the appliance fails due to a power failure, the memory function will work for 10 minutes.
This way, you do not have to restart the program when the power is back. If the outage lasts longer than
10 minutes, the program will be cancelled.
SETTING HOME MADE
The Home made button is reserved for your own baking program. You can determine the time for all
program phases yourself. If you want to skip certain phases, set the time to 0:00.
Attention: the settings of this button will not be saved when the power cord is unplugged.
1. Press the Home made button or select program 17 using the Menu button.
2. Press the Home made button again to start programming. The time and the program phase icon will
flash on the display. See the table of program phases and default time settings below.
3. Set the desired time for each phase using the Time + (increase time) and Time – (decrease time)
buttons. Confirm the selected time by pressing the Home made button.
58
B3971