Dell PowerEdge R660 Manuel D'installation Et De Maintenance page 84

Table 77. 8 x 2.5 inch (SAS4/SATA) (fPERC12) (continued)
Order From
3 CTRL_SRC_SA1 (fPERC controller
connector)
4 BP_PWR_CTRL (backplane power
connector)
5 SL4_CPU1_PB2 (signal connector on
system board)
Figure 30. Configuration 1-: 8 x 2.5 inch (SAS/SATA) (fPERC11)
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse sequential
order.
Table 78. 8 x 2.5 inch (SAS/SATA) (fPERC11)
Order From
1 SIG_PWR_1 (system board power
connector)
2 SL3_CPU1_PA2 (signal connector on
system board)
3 CTRL_SRC_SB1 (fPERC controller
connector)
4 BP_PWR_CTRL (backplane power
connector)
84 Disassembly and reassembly
To
BP_DST_SA1 (backplane signal connector) and BP_DST_SB1
(backplane signal connector)
FPERC_GF
CTRL_DST_PB1 (fPERC input connector)
To
BP_PWR_1 (backplane power connector)
CTRL_DST_PA1 (fPERC input connector)
BP_DST_SA1 (backplane signal connector) and BP_DST_SB1
(backplane signal connector)
FPERC_GF