Dell PowerEdge R660 Manuel D'installation Et De Maintenance page 101

Figure 47. Configuration 18: BOSS-N1 cable
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse sequential
order.
Table 95. BOSS-N1 cable
Order From
1 BOSS_PWR (BOSS-N1 power connector on
system board)
2 SL12_PCH_PA6 (BOSS-N1 signal cable on
the system board)
Figure 48. Configuration 19: 8 x 2.5 inch Universal Smart Flow (2 CPU) (fPERC11)
To
BOSS_PWR (BOSS-N1 power connector on BOSS-N1 module)
CTRL_DST_PA1 (BOSS N1 signal cable on the BOSS-N1 module)
Disassembly and reassembly 101