Dell PowerEdge R660 Manuel D'installation Et De Maintenance page 267

Figure 234. System health and system ID indicator
Tableau 129. System health and system ID indicator codes
System health and system ID
indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
Codes indicateurs iDRAC Quick Sync 2
Le module iDRAC Quick Sync 2 (en option) se situe sur le panneau de configuration gauche écran IO avant du système.
Condition
Indicates that the system is powered on, is healthy, and system ID mode is not active. Press the
system health and system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health and system ID button to switch
to system health mode.
Indicates that the system is in fail-safe mode. If the problem persists, see the
Indicates that the system is experiencing a fault. Check the System Event Log for specific error
messages. Guide EEMI
Diagnostics du système et codes des voyants
Getting help section.
267