Features And Terminology - Jet JWDS-1632-M Mode D'emploi

Conveyor:
Conveyor speed..........................................infinitely variable within 0-3 m/min ..................... infinitely variable within 0-3 m/min
Conveyor table dimensions................................... ..................... 456 x 420 mm ....................................................... 456 x 420 mm
Conveyor height from floor.................................................. ................. 812 mm ................................................................. 812 mm
Dust collection:
Dust port outside diameter ................................................................ 100mm ..................................................................100mm
Minimum extraction volume required ............................................ 560m3/h ............................................................... 560m3/h
Dimensions:
Shipping carton, base machine .......... ............................. 985 x 570 x 510 mm .............................................. 985 x 570 x 510 mm
Shipping carton, open stand ........ .......................................860 x 415 x120 mm ...............................................860 x 415 x120 mm
Assembled dimensions........................................... ........ 508 x 1269 x 1007 mm .......................................... 508 x 1269 x 1007 mm
Weights:
Net weight ............................................................................................. 71 kg ..................................................................... 75 kg
Shipping weight ..................................................................................... 83 kg ..................................................................... 87 kg
The specifications in this manual were current at time of publication, but because of our policy of continuous improvement,
JET reserves the right to change specifications at any time and without prior notice, without incurring obligations.

5.0 Features and Terminology

The illustration below shows the major components and features of the JWDS-1632-M / JWDS-1836-M Sander. These are
referenced throughout the manual and will help to familiarize you with the operation and functions of the machine.
Drum (pre-installed
80G abrasive)
Outfeed table (optional
accessory)
Drive roller
Drum carriage
Drum alignment
knob
Table locking screw
Conveyor take-up
Motor mount
slide
Dust hood
Driven roller
Height adjustment
lead screw
Figure 5-1
7
Drum height
adjustment handle
Shroud
Drum motor 1-1/2HP
Depth indicator
Control box
SandSmart
controller
Drum motor on/off switch
Main power switch
Infeed table (optional
accessory)
Conveyor bed
TM