Technical Data - REMS Cento Notice D'utilisation

g

1. Technical data

Use for the intended purpose
WARNING
REMS Cento and REMS DueCento are intended for the purpose of cutting and deburring he inside and outside of pipes.
All other uses are not for the intended purpose and are therefore prohibited.
1.1. Scope of Supply
Base frame
Rollers INOX (set) of tubular stainless steel
Roller insert for cutting pipes Ø 40 – 100 mm
Ring spanner size 27/17
1.3. Area of application
Cast pipes (SML) DIN 19522
1.4. Speed
Cutting wheel idle speed
1.5. Electrical data
1.7. Weight
1.9. Vibrations
CAUTION
2. Start-up
2.1. Electrical connection
WARNING
Caution: Mains voltage present!
output of the pipe cutting machine when using an extension cable.
REMS Cento
Fasten the pipe cutting machine e.g. to REMS Jumbo (Fig. 1) (Art. No. 120200)
or to the base frame (Fig. 2) (Art. No. 849315) with 4 or 2 M8 screws. Make
849315
845110
849112
REMS Cento
DN 40 – 100 mm
115 rpm
= 87 dB
pA
= 98 dB
wa
= 100 dB
pc peak
K = 3 dB
K = 1.5 dB
to be cut in the centre of the rollers (3) of the pipe cutting machine. Do not allow
-
material rest(s) between the pipe cutting machine and the pipe end(s) if neces-
845060
849112
REMS DueCento
DN (40) 100 – 200 mm
115 rpm
L = 87 dB
pA
L = 98 dB
wa
L = 100 dB
pc peak
K = 3 dB
K = 1.5 dB
g
-