GE Profile CustomStyle 22 Série Manuel D'utilisation Et D'installation page 28

REVERSING THE DOOR SWING
TRANSFER REFRIGERATOR
8
DOOR HANDLE TO THE RIGHT
To remove the handle: Remove the plug button by
carefully prying under the edge with a putty knife.
Remove the exposed screw holding the handle.
Remove the two screws holding the handle to the top
of the door. Pull the top of the handle away from the
door, unhook the bottom bracket from the door, and
place the assembly aside.
Long Handle
Hole
Handle
Plug
Pin
After removing the handle: Move the small plug
buttons from the top right side of the door top and
insert them into the holes on the opposite side.
Move the large plug button from the left edge of the
door and insert it into the hole on the opposite side.
Plug Button
Installation Instructions
Handle Plug
Short Handle
Handle
Plug
Small Plug
Buttons
(CONT.)
TRANSFER REFRIGERATOR DOOR
8
HANDLE TO THE RIGHT (CONT.)
Transfer the door plug button to the opposite side.
Reinstalling the handle: Attach the handle to the
right side of the door. Reinstall the plug button.
Long Handle
Handle
Plug
28
Button
Short Handle
Hole Handle
Plug
Pin