Télécharger Imprimer la page

Ribimex PRBVB420TH Manuel D'instructions Et D'utilisation page 22

Broyeur de vegetaux thermique

Publicité

6.1- Maintenance schedule
Frequency
Items
Engine oil
Check and
refill
Replace
Air filter
Check and
element
clean
Replace
Sediment
Clean
cup
Spark plug Check and
clean
Replace
Spark
Clean
arrester
Valve
Check and
clearance
adjust
Fuel tank
Clean
and filter
Fuel line
Check
NOTE: (1) perform service more frequently when used in dusty areas.
(2) perform service by authorized dealer only.
6.2- Maintenance
Engine oil replacement
• Place the machine on a level surface and warm up the
engine for several minutes, then stop the engine.
• Wear protective gloves to avoid spillage on hands.
• Remove both oil filler cap (11) and oil drain plug, then
completely drain the waste oil in a container. See Fig.
11.
• NOTE: Refer to Section 6.5 for proper disposal of
waste oil.
• Restore the oil drain plug onto the machine.
• Refill with the recommended oil (refer to Table 1) and
check the oil level.
Air filter element cleaning
• Unscrew and remove the wing nuts on top of the air filter cover.
• Take off the cover and remove the filter element.
• Wash the filter element using a household detergent or a high flash point solvent, then
squeeze it dry.
• Soak the element thoroughly in clean engine oil, then squeeze out any excess oil.
• Reinstall the filter and air filter cover, securing it with the wing nuts.
Each use
First
month or
20 hrs
x
x
x
Every 3
Every 6
months or
months or
50 hrs
100 hrs
x (1)
Every 2 years (2)
Every year
or 300 hrs
x
x
x
x
x
x
x (2)
x (2)
Oil filler cap
Oil drain plug
Fig. 11
Page 22 / 41

Publicité

loading

Ce manuel est également adapté pour:

515080