Publicité
Étude et configuration de l'unité d'entraînement
5
Installation conforme à la norme UL
5.16
Installation conforme à la norme UL
5.16.1
Field Wiring Power Terminals
5.16.2
Short Circuit Current Rating
150
Manuel produit – MOVIMOT
REMARQUE
En raison des exigences UL, le chapitre suivant est toujours en anglais, indépendam-
ment de la langue de la présente documentation.
Observe the following notes for UL-compliant installation:
The devices are for use only in industrial machinery NFPA 79 applications.
For use in a Pollution Degree 1 or Pollution Degree 2 environmental only.
•
Use 75 °C copper wire only.
•
Tighten terminals to 17.7 – 21.24 in-lbs (screw connect terminals only).
Suitable for use on a circuit capable of delivering not more than 65,000 rms symmetri-
cal amperes (models with maintenance switch not more than 5,000 rms) when protec-
ted by when protected by 600 V maximum non-semiconductor fuses (Class CA, CB,
CD, CF, G, J, K-1, K-5, RK1, RK5, T) or when protected by 500 V maximum inverse
time circuit breakers having an interrupting rating not less than 65 kA rms symmetrical
amperes..
Suitable for motor group installation on a circuit capable of delivering not more than
65,000 rms symmetrical amperes (models with maintenance switch not more than
5,000 rms) when protected by 600 V maximum non-semiconductor fuses (Class CA,
CB, CD, CF, G, J, K-1 , K-5, RK1, RK5, T) or when protected by 500 V maximum
inverse time circuit breakers having an interrupting rating not less than 65 kA rms
symmetrical amperes.
The max. voltage is limited to 500 V.
®
flexible DAC
Publicité
