CAME ZM3E Manuel D'installation page 60

Self-Learning
Save a new transmitter by copying an existing one without following the add new user procedure [New User].
[USERS]
Version
Display the fi rmware version number.
[INFO]
No. runs
Display the number of completed manoeuvres.
[INFO]
Initial message
Change the initial message.
[INFO]
Resetting the system
Restore factory settings.
[INFO]
Motor test
Check the gate leaves open in the right direction.
[MOT TEST]
[Self-Learning]
[Version]
[No. runs]
[Initial msg]
[System reset]
[Deactivated] (Default)
[Activated]
[WWW.CAME.COM] (Default)
Press ENTER to change the initial message.
Use the ENTER key to move the cursor forwards.
Use the ESC key to move the cursor backwards.
Use the arrows to select a letter or a number.
Press and hold ENTER for a few seconds to confi rm.
[Confi rm? (No)]
[Confi rm? (Yes)]
Press ENTER to confi rm.
[<=M1 M2=>]
Press and hold the button < button.
Check that M1 performs opening.
Press and hold the button > button.
Check that M2 performs opening.
If the leaf does not move in the correct direction,
invert the motor phases.