CAME ZM3E Manuel D'installation page 52

Thrust
Before every opening or closing manoeuvre, the leaves thrust inwards to release the electric lock.
The thrust time is set with the [Thrust T.] function
[FUNCTIONS]
Total stop
This stops the gate and excludes automatic closing. Use a control device to resume movement.
[FUNCTIONS]
CX input
Associate a function with the CX input.
[FUNCTIONS]
CY input
Associate a function with the CY input.
[FUNCTIONS]
CZ input
Associate a function with the CZ input.
[FUNCTIONS]
[Thrust]
[Total stop]
[CX input]
[CY input]
[CZ input]
[Deactivated] (Default)
[Close]
[Open]
[Open-Close]
[Deactivated]
[Activated] (Default)
[Deactivated]
[C1] = Reopen while closing (Photocells) (Default)
[C2] = Reclose while opening (Photocells)
[C3] = Partial stop Only with [Automatic close] activated.
[C4] = Obstacle standby (Photocells)
[C7] = Reopen while closing (sensitive edges)
[C8] = Reclose while opening (sensitive edges)
[Deactivated]
[C1] = Reopen while closing (photocells)
[C2] = Reclose while opening (Photocells)
[C3] = Partial stop (Default) Only with [Automatic close]
activated.
[C4] = Obstacle standby (Photocells)
[C7] = Reopen while closing (sensitive edges)
[C8] = Reclose while opening (sensitive edges)
[Deactivated] (Default)
[C1] = Reopen while closing (photocells)
[C2] = Reclose while opening (Photocells)
[C3] = Partial stop Only with [Automatic close] activated.
[C4] = Obstacle standby (Photocells)
[C7] = Reopen while closing (sensitive edges)
[C8] = Reclose while opening (sensitive edges)