Control And Indicator Settings - GE WSLP1500 Manuel D'utilisation Et D'installation

About the control and indicator settings.
Before starting the washer:
•
Sort laundry by color and/or fabric type.
•
Load laundry in the washer.
•
Add detergent to the dispenser drawer.
•
Add fabric softener to the fabric softener dispenser.
•
Add bleach , if desired, to the bleach dispenser.
Power
1
Press the Power button to turn on the control panel.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
Cycles
2
Press the Cycles button to select the desired cycle.
Normal
Delicates
Speed Wash
Heavy Duty
Handwash
Soak Cycle
My Cycle
Basket Clean
Load Size
3
This washer will automatically determine the correct amount of water suited to the size and type of load placed in
the unit. To change load size, press the Load Size button and select the desired load size: Extra Large; Extra Large-
Large; Large; Large-Medium; Medium; Medium-Small; Small. NOTE: Extra Large cannot be selected for Normal
wash cycle. The light will indicate the load size selected. Adjust the load size accordingly. Loosely load clothes no
4
higher than the top row of holes in the washer basket.
5 4 3
For heavily to lightly soiled colorfast cottons, household linens, work and play clothes. This cycle
provides the best overall cleaning and should be used for most everyday items. Provides normal wash
and medium speed spin.
For lingerie and special-care fabrics with light to normal soil. Provides light wash and low speed spin.
For small loads of lightly soiled items that are needed in a hurry. Provides light wash/rinse and short
high speed spin.
An above normal cycle for heavily soiled or stained clothes. A soak cycle is added and the agitate
cycle is extended for extra cleaning. This more aggressive cycle should be used sparingly.
For items labeled hand-washable with light soils. Provides gentle tumbling and soak during
wash and rinse.
An extended wash cycle to loosen embedded soils and stains.
To save a favorite cycle, set Cycles to My Cycle and select the desired Process, Load Size,
Options and Water Temp settings. Press the Start button. The washer will automatically save
the setting and start.
To change the My Cycle, re-save following the above process.
To use My Cycle, set Cycles to My Cycle and press the Start button.
Use for cleaning the basket of residue and odor. Recommended use of at least once per month.
NOTE: Never load laundry while using Basket Clean. The laundry may become damaged. See
the Care and Cleaning section.
11
7 6
10 9
2 8 1