GE WSLP1500 Manuel D'utilisation Et D'installation page 18

WASHER CONNECTIONS FOR PORTABLE MODEL
MAKE SURE THE TEMPERATURE
6
SELECTOR IS SET AT COLD
SLOWLY TURN ON THE WATER
7
FAUCET ALL THE WAY TO THE
DESIRED TEMPERATURE SETTING
PLUG THE POWER CORD INTO A
8
3-PRONG GROUNDED OUTLET
The electrical power cord is on the back of the
washer.
Ensure proper ground
exists before use
Installation Instructions
18
REMOVE THE PROTECTIVE FILM
9
COVERING THE CONTROL PANEL
INSTALLATION CHECKLIST
10
Before starting the washer, check to make sure:
❏ Main power is turned on.
❏ The washer is plugged in.
❏ The water faucets are turned on.
❏ The unit is level.
❏ There are no leaks at the faucet, drain line
or washer.