GE WSLP1500 Manuel D'utilisation Et D'installation page 20

WASHER CONNECTIONS FOR PORTABLE MODEL
If you have two separate water connections, your washer
can be connected to both the hot and cold water faucets.
This kit can be purchased from your dealer or from Parts
and Accessories. In the United States, call 800.626.2002.
In Canada, consult the yellow pages for your local Mabe
Canada number.
TO CONNECT THE WASHER:
CONNECT TO WATER LINE
1
Connect HOT and COLD water inlet hoses to the
HOT and COLD faucets.
CONNECT DRAIN HOSE
2
Secure the drain hose to the sink or stand pipe.
Sink
Installation Instructions
Cable
Tie
Cable
Tie
Stand Pipe
PLUG THE POWER CORD INTO A
3
3-PRONG GROUNDED OUTLET
Ensure proper ground
exists before use
INSTALLATION CHECKLIST
4
Before starting the washer, check to make sure:
❏ Main power is turned on.
❏ The washer is plugged in.
❏ The water faucets are turned on.
❏ The unit is level.
❏ The drain hose is properly tied up.
❏ There are no leaks at the faucet, drain line
or washer.
TO DISCONNECT THE WASHER:
TURN WATER FAUCETS OFF
1
UNPLUG POWER CORD AND
2
RETURN IT TO THE STORAGE AREA
DISCONNECT THE DRAIN AND
3
WATER SUPPLY HOSES
Hang them on the storage rack.
20