Publicité
19.1 Setting the alarm time
You can only operate the alarm function once the correct time has been set.
Depending on the configuration, this is done automatically or must be set
manually. The time can updated either manually, via DAB/UKW or the
Internet. Further information on this can be found under point 20.4.
>
Go through all the points in the alarm clock configuration one after the other.
Confirm each entry with the OK button. Alarm
clock
>
Here you can choose between Off (alarm clock is switched off), Daily (every
day of the week), Once, Weekdays (Mon. - Fri.) or Weekends (Sat. and Sun.).
Press the OK button to accept the setting.
Wake-up time
>
Here you can enter the alarm time and, if necessary, the date.
First select the hours using the arrow buttons /▲▼ and press the OK button to
accept. Then enter the minutes. Accept these by pressing the OK button as well.
If you have selected [Once] under Alarm clock, you must enter the date as
well as the time as described above.
Source
>
The source then entered. Buzzer, DAB+ and
FM is available. Press the OK button to accept the setting.
Programme
>
If you have selected DAB+ or FM, you can then specify whether you want to be
woken up with the last station you listened to or with one from your
favourites list. Press the OK button to accept the setting.
Volume
>
Use the arrow buttons /▲▼ to select the volume at which you want to be
woken up. Press the OK button to accept the setting.
Save
>
Press the OK button to save the alarm clock.
The alarm clock is active as soon as you have set the alarm repetition to
Daily, Once, Weekend or Working days. An alarm clock symbol appears in
the status bar with the corresponding number of the active alarm clock.
39
Publicité
