Publicité
15 USB music playback
You have the option of playing audio files on a USB data carrier via the
DIGITRADIO 760 CD IR.
General information on the use of USB media
-
The device does not support the connection of USB media (hubs ...) via
USB extension cables.
-
Not suitable for direct connection to PCs!
-
The device supports USB media up to 32 GB that are formatted in
FAT32 file format.
-
Only music files of the type .mp3 can be played.
-
The display of the folders depends on the structure on your USB medium.
Therefore, pay attention to the information on the display.
-
If no storage medium is connected or cannot be read, the message [No
medium found] appears on the display.
>
Insert the USB data carrier into the USB port (2) on the front of the
device.
>
Switch to USB mode by pressing the MODE button.
>
USB] appears the display.
>
The MP3/audio files are read in [Loading process] and shown on the
display in the form of the total number of folders [F] and tracks [T]. Wait
until the content has been read in completely to ensure that all the required
information has been read from the storage medium. Playback then starts
automatically.
15.1 Control USB playback
>
You can pause playback by pressing the play/pause button
time flashes on the display) or continue by pressing it again.
>
Press the Stop button
on the display.
15.2 Set title
>
You can select folders/albums using the F- or F+ buttons on the remote
control.
>
Use the Previous track
previous track.
The display shows the set folder [F] and track [T] number.
to stop playback. The total number of tracks appears
or Next track
(the playing
buttons to skip to the next or
35
Publicité
