Télécharger Imprimer la page

TechniSat DIGITRADIO 760 CD IR Mode D'emploi page 19

Publicité

7.6 Connect to the mains
WARNING!
Do not touch the mains plug with wet hands, risk of electric shock!
ATTENTION!
Lay the mains cable so that nobody can trip over it.
>
Make sure that the operating voltage of the appliance matches the local
mains voltage before plugging it into the wall socket.
>
Plug the mains cable into a mains socket.
To connect to the mains, insert the mains plug fully into the socket.
Use a suitable, easily accessible mains connection and avoid using
multiple sockets!
In the event of faults or smoke and odours coming from the housing, pull
the mains plug out of the socket immediately!
If the appliance is not to be used for a longer period of time, e.g. before
travelling, unplug the mains plug.
7.7 Connecting the headphones
ATTENTION: Hearing damage!
Do not listen to music at high volume through headphones. This can lead to permanent
lead to hearing damage. Before using headphones, adjust the device volume to the
minimum level.
Only use headphones with a 3.5 millimetre stereo jack plug.
>
Insert the plug of the headphones into the headphones socket (11) on
the front of the device. The sound is now reproduced exclusively via the
headphones, the loudspeakers are muted.
>
If you want to listen via the speakers again, unplug the headset from
the headset socket on the device.
19

Publicité

loading