Publicité
10.8 Volume control (DRC)
The volume adjustment function is used to set the compression rate, which compensates
for dynamic fluctuations and the associated volume variations.
>
Open the menu by pressing the MENU button.
>
Use the arrow buttons /▲▼ to select the [Volume adjustment] menu item
and confirm your selection by pressing the OK button.
>
Use the arrow buttons /▲▼ to select the compression rate:
DRC high - High compression
DRC low - Low compression
DRC off - compression switched off.
>
Confirm your selection by pressing the OK button.
10.9 Delete inactive transmitters
This menu item is used to remove old and no longer receivable channels from the
channel list.
>
Open the menu by pressing the MENU button.
>
Now use the arrow buttons /▲▼ to select the menu item [Delete inactive
channels] and confirm your selection by pressing the OK button.
You will be asked [Yes] or [No] whether the inactive transmitters should be
deleted.
>
Use the arrow buttons /▲▼ to select the entry [YES] and confirm by
pressing the OK button.
10.10 Channel order
The channel order of the channel list can be sorted either alphanumerically or by
provider.
>
Open the menu by pressing the MENU button.
>
Now use the arrow buttons /◀▶ to select the menu item [Channel order] and
confirm your selection by pressing the OK button.
>
Now use the arrow buttons /◀▶ to select either [Alphanumeric] or
[Provider] and confirm with OK.
27
Publicité
