Publicité
14.7 Random playback
You can use the random generator to play the tracks in any order you like.
>
During playback, press the SHUFFLE button .
>
To switch the function off again, press the SHUFFLE button again.
When shuffle playback is active, this is indicated by a shuffle icon in the
status bar.
14.8 Pr ogramming function
With the programme function, you can play a maximum of 20 tracks from a music CD in a
sequence that you specify.
You can only carry out programming when a disc is in the closed CD
compartment and when the device is in stop mode.
>
Stop any ongoing playback with the
>
Press the FAV button on the remote control. The display shows
[Programming].
The display shows [T01 P01] for the first programme position. (P = programme
position, T=track) is displayed. For MP3 CDs, [F01 T001 P01] is displayed
(F=folder/album).
>
Use the arrow buttons /▲▼ or the buttons
want to programme.
>
You can select folders/albums on MP3 CDs using the F- or F+ buttons
on the remote control.
>
Save the desired title by pressing the OK button. The display now shows [P02]
for the second programme position.
>
Now select the second track to be programmed as described
above. Then press the OK button again to save.
>
Proceed in the same way for all titles to be programmed.
>
To play back the programming, the
Play/Pause.
>
To return the normal sequence, press the
CD compartment or switch off the radio. The programming will be lost and must
be carried out again.
34
STOP button.
/
to select the track you
STOP button twice or open the
Publicité
