Publicité
with the DIGITRADIO 760 CD IR. note that you can only connect 1 device to
the DIGITRADIO 760 CD IR at a time.
>
Wait until [BT] flashes in the display of the DIGITRADIO 760 CD IR and
[Bluetooth visible] appears.
>
Search for the DIGITRADIO 760 CD IR entry in the list on your
smartphone/tablet and select it. If you are prompted to enter a PIN, enter
"0000" (4x zero).
>
Once pairing has been successfully completed, [BT] is displayed continuously.
16.3 Play music
>
Select a music track in the music player on your smartphone/tablet and play it.
>
The sound is now played back via the DIGITRADIO 760 CD IR.
Depending on the Bluetooth protocol of your external device, you can control
the music playback using the playback buttons on the remote control or the
front of the device.
Play/Pause
Next title
Previous title
Title from beginning
Volume
Alternatively, you can use the playback controls of the music app on your
external device.
External devices can also be charged with 5 V, 1 A via the USB socket on the
front of the device.
>
To decouple external devices, press and hold the BACK /
device for approx. 3 seconds or decouple your external device.
17 AUX IN / LINE IN / OPTICAL IN
You can play the analogue or digital sound of an external device (e.g.
smartphone/tablet/receiver) via the speakers of the DIGITRADIO 760 CD IR.
AUX IN
>
Connect an audio cable (3.5 mm jack) from the audio output of your
external device to the AUX IN connection (19) on the rear panel.
>
To select the AUDIO IN input, press the MODE button until [AUX IN] appears
in the display.
- button
- Key
- 2x button
- key
- Volume +/- buttons
button (14) on the
37
Publicité
