Publicité
When making audio CDs, observe the legal requirements and do not infringe
DriGer's copyrights. Always keep the CD compartment closed to prevent dust
from accumulating on the laser optics.
The device can play CDs with MP3 data and normal audio CDs (CD-DA).
Do not use any other extensions, such as *.doc, *.txt, *.pdf etc., when
converting audio files to MP3. Music files with the extension *.AAC, *.DLF,
*.M3U and
*.PLS.
Due to the variety of different encoder software, it cannot be guaranteed that
every MP3 file can be played without interference.
If a track/file contains an error, playback continues with the next
track/file.
It is advantageous to burn the CD at low speed and to create the CD as a
single session and finalised.
14.2 Which discs you can use
The CD player is compatible with CD, CD-R/RW and MP3 CD media. You can play all
the discs mentioned here (disc size 12 cm/8 cm CDs, playing time 74 min. or 24 min.
max.) with this device without an adapter.
If you are transporting the device, remove the disc from the drive.
This will prevent damage to the CD player and the disc.
The playback quality of MP3 CDs depends on the bit rate setting and the
recording software used.
14.3 Play CD
>
To insert a CD, press the
the device or on the remote control. The CD tray opens forwards. It must not
be obstructed in the process.
When the CD compartment is open, make sure that no foreign objects can get
into the device. The lens of the laser scanner must not be touched under any
circumstances.
Only open the CD tray when the CD is at a standstill.
Carefully insert the CD with the printed side facing upwards. Make sure that
the CD is not sitting at an angle.
>
Close the CD tray by pressing the
CD is read in.
Do not try to close the CD tray by pressing against it.
This can damage the mechanics.
To insert/remove the CD, hold it by the edge.
32
CD tray open/close (Eject) button on the front of
CD tray open/close button again. The
Publicité
