Publicité
>
To optimise the volume, use both the volume control on the DIGITRADIO 760
CD IR and on the connected device. Set the volume on the connected device
as high as possible and then adjust the regular volume on the DIGITRADIO
760 CD IR. If the volume on the connected device is set too low, you will
probably hear a hissing sound on the DIGITRADIO 760 CD IR.
LINE IN
>
Connect a cinch cable from the audio output of your external device to the
LINE IN 1 or LINE IN 2 connection (20, 21) on the back of the device.
>
To select the LINE IN input, press the MODE button until [LINE IN 1] or
[LINE IN 2] appears in the display.
OPTICAL IN
>
Connect an OPTICAL fibre optic cable from the digital audio output of your
external device to the OPTICAL IN connection (18) on the back of the device.
>
To select the OPTICAL IN input, press the MODE button until [OPTICAL IN]
appears in the display.
18 Sleep timer
>
Select MENU> [Main menu]> [Sleep] and press OK.
>
You can use the arrow buttons /▲▼ to set the time period after which the
appliance switches to standby in each operating mode in increments of Sleep
off, 15, 30, 45, 60, 90 and 120 minutes. Press the OK button.
Alternative:
>
Press the SLEEP button on the remote control several times.
A clock symbol appears in the status bar of the display showing the time
remaining until the DIGITRADIO 760 CD IR switches to standby.
19 Alarm clock
>
Select MENU> [Main menu]> [Alarm clock] and press OK.
>
Select one of the alarm time memories Alarm clock 1 or Alarm clock 2 using
the
arrow buttons /▲▼ and confirm with OK.
Alternatively:
>
Press the Alarm clock 1 or Alarm clock 2 button on the remote control to
open the alarm clock configuration directly.
38
Publicité
