Publicité
11 FM radio
>
To select FM mode, press the MODE button until the display shows
[FM Radio] appears.
Alternative:
>
Open the menu by pressing the MENU button and select
[Main menu]> [FM].
11.1 Set the frequency manually
>
Press the arrow buttons /▲▼ several times to set the desired
transmitter frequency.
The arrow buttons▲ increase the reception frequency by 0.05Mhz, the arrow
buttons
▼ reduces the reception frequency by 0.05Mhz.
In this way, you can specifically set a frequency to receive the desired
station. If the frequency is set correctly, the set station and its name will be
shown on the display if it is transmitting RDS information.
11.2 Automatic search for channels
As an alternative to manually setting a reception frequency, you can also search for
stations automatically. The settings that you have defined in the menu under [Scan
settings] apply here.
>
Press the SCAN button. The station search is stopped at the next
receivable station and the station is played back.
Alternative:
>
Press and hold the arrow buttons /▲▼ to start the search. This ends when
a sufficiently strong receivable station has been found.
>
Repeat the procedure to search for another transmitter.
11.3 Search setting
>
Open the menu by pressing the MENU button.
>
Use the arrow buttons /▲▼ to select the menu item [Search settings]
and confirm your selection by pressing the OK button.
>
Now select whether weak stations [NO] should also be detected during the
search or only strong stations [YES] and confirm your selection by pressing the
OK button.
If you select [YES], the channels are usually free of interference, but not all
channels will be found. If you select [NO], all receivable stations will be
found, but they may also be slightly noisy. In this case, try realigning the
aerial or changing the location.
28
Publicité
