Inventum IKA8035 Manuel D'utilisation page 38

1. When the appliance is off, press the on/off button. Within 10 seconds, press and hold the automatic
synchronization button for 5 seconds. The left front indicator will show t5 and the right front indicator will show 0.
2. Press the child lock button to change the delay time. The default time is 0.
3. Press the on/off button to confirm the shut-off time.
The automatic shut-off mode can be set to the following times: 0 min., 1 min., 2 min., 5 min., 10 min. or 20 min.
USING THE BOOST MODE
The boost mode provides extra power to a cooking zone and can be activated for a maximum of two cooking zones
at a time.
Note:
The boost mode can be set in any cooking zone.
When using the boost mode, the maximum available power will be divided between two cooking zones,
which work as a pair. This means both cooking zones on the left form a pair and the two cooking zones
on the right form a pair.
If the boost mode is set to the front left cooking zone and you want to set the boost mode for another
cooking zone, you need to choose a cooking zone on the right side.
When the boost mode is set to a cooking zone on the left, than the other cooking zone on the left cannot
be set. Please wait until the power level can be decreased, before setting the other cooking zone on the
left.
Starting the boost mode
1. Touch the boost button B of the cooking zone you want to use, to set the power level to the maximum. The
operation indicator shows the marquee action.
Note: The boost mode works for 10 minutes. After 10 minutes, the power level returns to it's original
setting. The bridge zone boost function duration is 5 minutes.
Note: If the original setting is 0, the boost mode will return to 15.
Stopping the boost mode
1. Touch the slider of the cooking zone you want to cancel the boost mode for. The operation indicator shows the
set power level.
USING THE BRIDGE MODE
In the bridge mode you can connect two cooking zones to create a larger cooking zone. The appliance has two
bridge zones, one with the two left cooking zones and one with the two cooking zones on the right.
Activating the bridge mode
1. Make sure that the appliance is on.
2. Touch the bridge zone button. The front and rear cooking zones are active and the controls for both cookings
zones work simultaneously.
De-activating the bridge mode
1. Touch the bridge zone button. The controls for both cooking zones are disconnected and can be set separately.
2. Touch the slider corresponding with the bridge zone and set the power level to "0". This will exit the bridge mode
in 3 seconds.
3. Press the on/off button.
38 • English