Publicité
Column Greasing:
Two post lifts finished with powder coat must have grease applied to the columns. Lifts are greased from the factory,
however, it is advised to check and ensure that the columns are still greased when installing the lift. If your lift has a model
number that matches a "powder paint" style lift as shown below, grease the columns with either Lighting grease, Tuf Oil,
Sil Glide, or an equivalent grease.
Apply the grease to the columns by wiping on a thin layer and polishing with a rag. Only apply grease on surfaces of the
columns where the slider blocks make contact. Be careful not to apply too much grease, only a thin layer is needed, wipe
off excess.
Lift
Series
SPO12
1000
SPO12
700
Model Number
SPO12x10xx
SPO12x7xx
2
Paint Style
Powder Paint
Wet Paint
Publicité
