Invacare Reliant 450 Manuel De L'utilisateur page 56

Invacare® Reliant™ 450/600
1. Note the hanger bar comes attached to the boom with a bolt, nut, washers, and pinch guard.
Refer to the images in this section for bolt and washer placement.
The hanger bar has three hooks on both ends to attach the sling that supports the patient during lifting.
2. Remove the existing hardware and replace the hanger bar.
3. Tighten the locknut onto the bolt until the locknut bottoms out.
CAUTION!
-DO NOT overtighten the nut and bolt. This damages the mounting bracket.
56
Fig. 10-4
1078987-O