Troubleshooting; Display Codes - Invacare Reliant 450 Manuel De L'utilisateur

10. Turn off the unit by pressing the ON/OFF key.
11. Turn on the unit by pressing the ON/OFF key.
The scale is now in normal operation.

11.6 Troubleshooting

SYMPTOM
Unit does NOT work properly.
Battery has been replaced and the unit still does NOT work
properly.

11.6.1 Display Codes

CODE DESCRIPTION
Calibration Required–indicates improper stored calibration data. Calibration is necessary.
Over Capacity–indicates a weight exceeding the capacity has been loaded on the scale.
1078987-O
PROBABLE
SOLUTION
CAUSE
Battery failure Check the battery. Replace if necessary.
Contact Invacare for service at 1-800-333-
6900.
11 Accessories
70