10 Devicenet Design; Connection Option; Devicenet Specification - Burkert 8681 Démarrage Rapide

Power supply of the SVs
(via AS-i)
Pin Assignment
1 AS-i+
2 not assigned
3 AS-i-
4 not assigned
An external initiator can be connected via the 3-way terminal strip "INI"
- see operating instructions, chapter "Connecting an external initiator".
18
(external)
Assignment Colour
AS-i+ brown
GND white
AS-i- blue
24 V+ black
english
Type 8681
DeviceNetdesign
10 DEVICENET DESIGN
10.1 Connection option
10.2 DeviceNet specification
EDS file 8681.EDS
Icons 8681.ICO
Baud rate Factory setting 125 kbit/s
Address Factory setting: 63
Process data 2 static input assemblies (input: from control head
to DeviceNet master/scanner)
1 static output assembly
Inputs 3 discrete feedback signals from the position
measuring system (positions S1 - S3)
1 discrete feedback signal from the external
initiator (S4)
1 analog position signal in mm
Connection left::
1 x M16 x 1.5 cable gland with
multipole connection (M12
plug according to IEC 61076-
2-101, 5-pole) to an 80 cm
long cable
Connection right:
1 x M16 x 1.5 cable gland for
external initiator