Ryobi RM480e Série Manuel D'utilisation page 32

PROBLEM
Blades do not rotate.
Blades do not rotate while moving in
reverse.
Mower won't reach full speed.
Blades continue to turn after operator
leaves seat without parking brake set.
Headlights not working.
Battery will not charge.
TROUBLESHOOTING
POSSIBLE CAUSE
Battery charge is low.
Blade engage knob is down.
Operator is not fully seated.
Build-up of debris under mower.
Reverse mode option is off.
Blade engage knob is down.
Battery charge is low.
Safety interlock system is not func-
tioning correctly.
Headlights are off.
Headlights are damaged.
Bad battery cells.
Poor cable connections.
MAKE THE MOST OF YOUR PURCHASE!
Go to http://register.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the Ryobi Help Line!
32 — English
SOLUTION
Charge the battery.
Raise blade engage knob.
Sit down fully on the seat.
Clean underside of mower housing.
Press reverse mode button to activate.
Raise blade engage knob.
Charge the battery.
Ensure safety interlock system seat plug
is fully connected. If blades still won't
stop, take mower to authorized service
center for repair.
Press headlight button to turn head-
lights on.
Replace headlights.
Replace battery.
Check/clean all battery connections.