Mortar Hose; Spray Lance - Titan POWRMAX 605 Mode D'emploi

PowrMax
4.4

MORTAR HOSE

1. Material connection mortar spraying machine
2. Control cable connection / controller
3. Atomizing air connection compressed air supply
4. Material connection spray lance
5. Mortar hose
6. Atomizing air connection spray lance
7. Control cable connection
2
1
7
3
6 5 4
4.5

SPRAY LANCE

1. Material connection
2. Combined material and air tap:
Open: material tap at 90° to spray lance
Closed: material tap points forwards
3. Texture tip:
Various texture tips can be used in the spray lance. The tip
size depends on the granular size of the coating material
and the desired spray pattern.
4. Hand-grip:
The hand-grip can mounted to either the right or left
side of the spray lance, depending on what is required.
The thread on the other side can be closed by way of the
attached stoppers for protection.
5. Control cable connection
6. Air flow regulator
7. Atomization air connection
6
7
5
4
EXPLANATORY DIAGRAM
2
1
3
11