Connecting Circuits And Accessories - Tecno-gaz Master Flux Plus Mode D'emploi

ENGLISH
6.3

Connecting circuits and accessories:

A
B
C
(Figura 8)
Connect the Rubber bag (F) to the flowmeter box by pressing it onto the relative nozzle.
The mask kits are connected to the device by the nozzle (G).
The gas exhaust tube will be connected in different ways, based on the type of gas
evacuation system that is being used.
(see 6.4 - EVACUATION OF EXHALED GASES).
14
G
D E F
Figura 8
H
I