HBK SP4M Notice De Montage page 8

2 MARKINGS USED
2.1 The marking used in this document
Important instructions for your safety are specifically identified. It is essential to follow
these instructions in order to prevent accidents and damage to property.
Symbol
CAUTION
Notice
Important
Tip
Information
Emphasis
See ...
2.2 The marking used on the product
CE mark
The CE mark enables the manufacturer to guarantee that the product com­
plies with the requirements of the relevant EC directives (the declaration of
conformity is available at http://www.hbm.com/HBMdoc).
Statutory waste disposal mark
In accordance with national and local environmental protection and mate­
rial recovery and recycling regulations, old devices that can no longer be
used must be disposed of separately and not with normal household
garbage.
6
Significance
This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in slight or moderate physical
injury.
This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
This marking draws your attention to important in­
formation about the product or about handling the
product.
This marking indicates application tips or other
information that is useful to you.
This marking draws your attention to information
about the product or about handling the product.
Italics are used to emphasize and highlight text and
identify references to sections, diagrams, or external
documents and files.
SP4M, SP4Mi
MARKINGS USED